DG613DY-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:2 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using DPDT switching circuits. A total of 1 circuits make up this switch device. Search with DG613 if you are looking for analog multiplexer variants. It has an internal resistance of 45Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 18V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 10V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of -1μA. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 15V. In the case of dual power supplies, you should connect at least 10V. The transfer of data can be performed over 500MHz bandwidths. There is also VIDEO APPLICATION to look out for in this electronic part. The Drain to Source resistance of this electronic component is 45Ohm. The analog switch ics has 4 outputs.

DG613DY-E3 Features

1 Channels
Switch Circuit: DPDT
-1μA Supply Current
Bandwidth: 500MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 45Ohm

DG613DY-E3 Applications

There are a lot of Vishay Siliconix
DG613DY-E3 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems