Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG643DJ-E3

DG643DJ-E3

DG643DJ-E3

Vishay Siliconix

70ns, 50ns SPDT 15Ohm Analog Switches BREAK-BEFORE-MAKE DG643 16 Pins 10nA 15V 16-DIP (0.300, 7.62mm)

SOT-23

DG643DJ-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 1.627801g
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 15Ohm
Terminal Finish Matte Tin (Sn)
Additional Feature VIDEO APPLICATION
Subcategory Multiplexer or Switches
Max Power Dissipation 470mW
Technology CMOS
Number of Functions 2
Supply Voltage 15V
Base Part Number DG643
Pin Count 16
Operating Supply Voltage 15V
Power Supplies 15-3V
Number of Channels 1
Number of Circuits 2
Max Supply Voltage 21V
Min Supply Voltage 10V
Analog IC - Other Type AUDIO/VIDEO SWITCH
Operating Supply Current 3.5mA
Nominal Supply Current 3.5mA
Max Supply Current 6mA
Turn On Delay Time 70 ns
Voltage - Supply, Single/Dual (±) 3V~15V ±3V~15V
Supply Type Dual, Single
Bandwidth 500MHz
Neg Supply Voltage-Nom (Vsup) -3V
Turn-Off Delay Time 50 ns
Max Dual Supply Voltage 15V
On-State Resistance (Max) 15Ohm
Min Dual Supply Voltage 10V
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 10nA
Channel Capacitance (CS(off), CD(off)) 12pF 12pF
On-state Resistance Match-Nom 1Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 70ns, 50ns
Charge Injection 19pC
Channel-to-Channel Matching (ΔRon) 1 Ω
Crosstalk -87dB @ 5MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 140ns
Switch-off Time-Max 85ns
Height 3.81mm
Length 21.33mm
Width 7.11mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
DG643DJ-E3 Product Details

DG643DJ-E3 Overview


Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. These analog multiplexers are built based on SPDT switching circuits. A 2 circuit is present in this switch device. Look for analog switch ic variants by searching with DG643. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 21V. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 10V. In order to operate this switch device, it would need a current of 3.5mA. A voltage higher than 6mA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 15V. The voltage should be at least 10V if you are using dual power supplies. An analog IC with the number AUDIO/VIDEO SWITCH is integrated into this board. There is a voltage range of 15V operating voltages for the electrical part. The transfer of data can be performed over 500MHz bandwidths. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION.

DG643DJ-E3 Features


1 Channels
Switch Circuit: SPDT
3.5mA Supply Current
Bandwidth: 500MHz
Additional Features: VIDEO APPLICATION

DG643DJ-E3 Applications


There are a lot of Vishay Siliconix DG643DJ-E3 Analog Switches & Multiplexers ICs applications.

  • Optical Applications
  • Sample hold systems
  • New designs requiring multiplexer functions
  • Remote Powered Equipment
  • Fiber In The Loop (FITL)
  • High-Voltage
  • CSU
  • Isolation
  • SDH
  • Audio and video routing

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News