DG9233DY-T1 Overview

Due to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. Due to its 1 channels, the electrical component produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. A SPST - NO switching circuit is used for these analog switches. This digital multiplexer has 30Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. Single supply type digital switch with a low cost. There should be 2.7V voltage fed to the electrical part below 2.7V. Using only a single voltage supply, this analog switch requires 2.7V~12V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A 2 input needs to be operated.

DG9233DY-T1 Features

1 Channels
Switch Circuit: SPST - NO

DG9233DY-T1 Applications

There are a lot of Vishay Siliconix DG9233DY-T1 Analog Switches & Multiplexers ICs applications.

• Channelized and Unchannelized DS3 applications
• Remote Powered Equipment
• Audio and video routing
• SDH/SONET multiplexers
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Transmit
• CSU
• 65 V DACs
• USB 1.1 signal switching circuits
• Routers