DG9263DQ-T1-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. There is an electrical component included in the 8 series. Unlike digital switches, these are based on SPST - NO switching circuits. There are 2 circuits in this switch device. Try searching for DG9263 variants of the analog switch ic. There is 60Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 8 pins functions. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. 1μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA.

DG9263DQ-T1-E3 Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current

DG9263DQ-T1-E3 Applications

There are a lot of Vishay Siliconix DG9263DQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• High speed data transmission line cards
• 65 V DACs
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Residential Gateways, Home Gateway/Router
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• Audio and video routing
• Sample-and-hold systems
• USB 1.1 signal switching circuits
• Digital Cross-Connects
• Routers