5962-9204101MEA Overview

As the electronic part is packed in 16-CDIP (0.300, 7.62mm), international shipping is convenient. The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SPST - NC switching circuit is used for these analog switches. The multiplexer consists of 4 circuits. Analog switches have 160Ohm internal resistance. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 30V should not normally be supplied to the switches. 10V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 100μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 28V operating voltages.

5962-9204101MEA Features

1 Channels
Switch Circuit: SPST - NC
100μA Supply Current

5962-9204101MEA Applications

There are a lot of Maxim Integrated 5962-9204101MEA Analog Switches & Multiplexers ICs applications.

• Remote wireless modules
• High speed data transmission line cards
• Battery-powered systems
• Residential Gateways, Home Gateway/Router
• Industrial
• Cross Connects
• PDAs
• Remote Powered Equipment
• Medical systems
• Fiber In The Loop (FITL)