DG9415DQ-T1-E3 Overview

As the electronic part is packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, there have been 10 terminations. The electronic part provides high-quality output because it has 2 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 10 pins. A SPDT switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with DG9415. A 17Ohm internal resistance characterizes this multiplexer. For functions related to 10 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. A cost-effective Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 2.7V. This multiplexer would work with 1μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V. It may damage the digital multiplexer if the voltage is higher than 1μA. The electrical part can be operated at 5V voltage levels. Operating 4 inputs is required. There is 17Ohm resistance between Drain and Source for this electronic part.

DG9415DQ-T1-E3 Features

2 Channels
Switch Circuit: SPDT
1μA Supply Current
Drain-to-Source resistance: 17Ohm

DG9415DQ-T1-E3 Applications

There are a lot of Vishay Siliconix DG9415DQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• Sample-and-hold systems
• Sample hold systems
• E1 Network Equipment
• CSU
• Cell phones
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• SONET
• Multi-Line E1 Interface Cards
• Fiber In The Loop (FITL)
• Automatic test equipment