SIP2801DY-T1-E3 Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 7.4V~12V voltage is supplied to the dc control and used for operating it. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 46kHz. The Surface Mount value makes it suitable for general dc dc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 8. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. A search for "SIP280*" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 8. The type is a particular Switching Regulator or Controllers of switching converter. dc dc voltage regulators should have a minimum input voltage of 6V. DC regulator outputs 8.1V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 750mA, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 52kHz on this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 10V. It runs on a supply current of 1mA.

SIP2801DY-T1-E3 Features

Transistor Driver Outputs
Switching Frequency: 46kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %

SIP2801DY-T1-E3 Applications

There are a lot of Vishay Siliconix SIP2801DY-T1-E3 DC to DC converter applications.

• Wide-range voltage regulation circuits
• Correction machines
• Automatic plug-in machines
• Photovoltaic power
• Program control systems
• Medical equipment
• CMM
• Servo drive system
• Gear/thread machining machines
• Domestic water pumps