Welcome to Hotenda.com Online Store!

logo
userjoin
Home

W25P20VSNIG

W25P20VSNIG

W25P20VSNIG

Winbond Electronics

3/3.3V V SpiFlash® 8 Pin Memory IC SpiFlash® Series 4.85mm mm

SOT-23

W25P20VSNIG Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tube
Series SpiFlash®
Published 2006
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish MATTE TIN
HTS Code 8542.32.00.51
Technology CMOS
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 1.27mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
JESD-30 Code R-PDSO-G8
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3/3.3V
Supply Voltage-Min (Vsup) 2.7V
Interface SPI, Serial
Memory Size 2Mb 256K x 8
Memory Type Non-Volatile
Operating Mode SYNCHRONOUS
Clock Frequency 40MHz
Supply Current-Max 0.025mA
Access Time 40 μs
Memory Format FLASH
Memory Interface SPI
Organization 2MX1
Memory Width 1
Write Cycle Time - Word, Page 5ms
Standby Current-Max 0.000005A
Memory Density 2097152 bit
Programming Voltage 2.7V
Serial Bus Type SPI
Endurance 100000 Write/Erase Cycles
Data Retention Time-Min 20
Write Protection HARDWARE/SOFTWARE
Length 4.85mm
Height Seated (Max) 1.72mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
W25P20VSNIG Product Details

W25P20VSNIG Overview


A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. Embedded in the 8-SOIC (0.154, 3.90mm Width) case, memory ics is a single file. On the chip, there is an 2Mb 256K x 8 memory, which is the size of the chip's memory. There is a FLASH-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 2.7V~3.6V volts. The recommended mounting type for memory ics is Surface Mount. A total of 8 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3V will be necessary. A clock frequency rotation within 40MHz is used for the ic memory chip to rotate data. The memory device in question has 8 pins, thus indicating that it has 8 memory locations that can be accessed. As for power supplies, this memory chip requires just 3/3.3V . It is an important component of the SpiFlash® series memory devices used in a variety of applications. Its SPI-type serial bus helps transfer data to the CPU efficiently. In order to operate your device, you will need to provide a maximum supply current of 0.025mA. A programming voltage of 2.7V is required to change a nonvolatile memory array's state.

W25P20VSNIG Features


Package / Case: 8-SOIC (0.154, 3.90mm Width)


W25P20VSNIG Applications


There are a lot of Winbond Electronics
W25P20VSNIG Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News