XC18V512SOG20C Overview

A neat 20-SOIC (0.295, 7.50mm Width) package is used.External packaging of type Tray.0°C~70°C-qualified.This device can be programmed using In System Programmable.The voltage fed to it is 3V~3.6V.FPGA is mounted in Surface Mount.Look for "XC18V512" for other related parts.Supply voltage 3.3V is required.20 terminations with different functions.FPGA is possible to use this memory device at a maximum voltage of 3.6V.If the device needs to be supplied with power, then a minimum voltage of 3V is required.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.If reflow soldering is being performed, the temperature should not be higher than 260 when soldering should be reflowed.FPGA has pins on the 20 axis.Through PARALLEL/SERIAL-processing, data is transmitted from this memory to the CPU.A memory chip can operate at a voltage no greater than 0.025mA.Parts include 20 pins.Using a 33MHz frequency, this memory IC can work at high speeds.To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the part.In specific, it can be described as a form of Flash Memories.

XC18V512SOG20C Features

Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.

XC18V512SOG20C Applications

There are a lot of Xilinx Inc. XC18V512SOG20C applications of configuration proms for FPGAs.

• servers
• eDRAM
• data buffer
• networking
• personal digital assistants
• workstations,
• cell phones
• multimedia computers
• eSRAM
• mainframes