This clock IC is packaged using the Tray method. This clock generator is embedded in the 20-WFQFN Exposed Pad, CSP package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 20 terminations found in this file. This time clock generator should be voltaged at 3V. The input of this clock generator is designed to be CMOS, TTL. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.7V. This clock PLL works with a supply voltage of 2.7V~5.5V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. Clock is designed for clock generator's output. A Clock/Frequency Synthesizer (RF) is a classification for the electronic part in question. There is a 20-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number is related to its related electronic parts. It is possible to connect to the PLL via 20 pins. PLL clock can handle a voltage of 5V as its supply voltage. This clock generator can be classified as a kind of PLL or Frequency Synthesis Circuits in general. This frequency synthesizer features 6-BIT SWALLOW COUNTER to produce better clock signals. 1 signal outputs allow for maximi1ation of output frequency. It is able to realize high efficiency when operating at a frequency of 550MHz. To fully perform its function, time clock generator requires a supply current of 4.5mA. During this clock generator operation, a maximum current of 4.5mA is supplied.
ADF4110BCPZ Features
Available in the 20-WFQFN Exposed Pad, CSP Supply voltage of 3V Operating supply voltage of 5V
ADF4110BCPZ Applications
There are a lot of Analog Devices Inc. ADF4110BCPZ Clock Generators applications.