As a clock IC, it uses the Tape & Reel (TR) package. 20-WFQFN Exposed Pad, CSP contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 20 terminations. For this clock generator ic, a voltage of 3V is required. This Clock PLL will be fed by CMOS, TTL as its input. Providing a maximum frequency of 6GHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. For safety reasons, this frequency generator's supply voltage should remain above 2.7V. There are 2.7V~3.3V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. This is an electronic part that can be classified as a Fractional N Synthesizer (RF) in this case. In particular, this clock PLL is designed to be used with microprocessors. ADF4157 is the base part number for finding related electronic parts. There is a 20 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3V. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. 1 signal outputs allow for maximi1ation of output frequency. This time clock generator requires a supply current of 23mA in order to operate properly. During normal operation, the maximum supply current should not exceed 29mA.
ADF4157BCPZ-RL7 Features
Available in the 20-WFQFN Exposed Pad, CSP Supply voltage of 3V Operating supply voltage of 3V
ADF4157BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4157BCPZ-RL7 Clock Generators applications.