A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. Clock PLL is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 20 terminations to be found. A voltage of 3V should be applied to this electronic frequency generator. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. It provides a maximum frequency of 2GHz. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL works with 2.7V~5.5V supply voltage provided. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It's compatible with Clock logic levels. A Clock/Frequency Synthesizer (RF) is a classification for the electronic part in question. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. ADF4208 is the base part number for finding related electronic parts. It is possible to connect to the frequency generators via 20 pins. The supply voltage should be maintained at 5V for high efficiency. As a result, it is commonly classified as a type of PLL or Frequency Synthesis Circuits clock PLL. The supply current of 14mA needs to be provided to fully play clock generator's function. I have designed a frequency synthesizer that has 2 elements and a low amount of jitter. Time clock generator supply currents should not exceed 5mA.
ADF4208BRUZ-R7 Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 5V
ADF4208BRUZ-R7 Applications
There are a lot of Analog Devices Inc. ADF4208BRUZ-R7 Clock Generators applications.