Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1211YRUZ

  • ADG1211YRUZ
  • ADG1211YRUZ

ADG1211YRUZ

ADG1211YRUZ

Analog Devices Inc.

130ns, 115ns SPST - NC 190Ohm Analog Switches BREAK-BEFORE-MAKE ADG1211 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG1211YRUZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 10 Weeks
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 190Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 150μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
[email protected] Reflow Temperature-Max (s) 30
Base Part Number ADG1211
Pin Count 16
Operating Supply Voltage 12V
Polarity Inverting, Non-Inverting
Number of Channels 1
Interface Parallel
Number of Circuits 1
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Operating Supply Current 220μA
Nominal Supply Current 320μA
Power Dissipation 150μW
Max Supply Current 380μA
Throw Configuration SPST
Turn On Delay Time 130 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 5V~16.5V ±4.5V~16.5V
Supply Type Dual, Single
Bandwidth 1 GHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 115 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 190Ohm
Min Dual Supply Voltage 4.5V
High Level Output Current 25mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 75 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 1.1pF 1.2pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 130ns, 115ns
Charge Injection -0.3pC
Channel-to-Channel Matching (ΔRon) 2.5 Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 120Ohm
Height 1.05mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.54000 $6.54
500 $6.4746 $3237.3
1000 $6.4092 $6409.2
1500 $6.3438 $9515.7
2000 $6.2784 $12556.8
2500 $6.213 $15532.5
ADG1211YRUZ Product Details

ADG1211YRUZ Overview


Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around -40°C~125°C TA are extended for operation. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. Unlike digital switches, these are based on SPST - NC switching circuits. Circuits number 1 make up this analogue multiplexer. ADG1211 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 190Ohm. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 16.5V. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 5V should be applied to the electronic component. The switch device would be able to operate with 220μA current. If put voltage greater than 380μA on the device, damage may be caused to the analogue multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. For dual power supplies, a voltage of at least 4.5V should be attached. This electrical part is compatible with 12V operating voltages. The 4 inputs need to be operated in order to work. In 1 GHz-bandwidths, data can be transferred. There is 120Ohm resistance between Drain and Source for this electronic part.

ADG1211YRUZ Features


1 Channels
Switch Circuit: SPST - NC
220μA Supply Current
Bandwidth: 1 GHz
Drain-to-Source resistance: 120Ohm

ADG1211YRUZ Applications


There are a lot of Analog Devices Inc. ADG1211YRUZ Analog Switches & Multiplexers ICs applications.

  • Intelligent PBX
  • Public switching systems
  • Microwave transmission systems
  • Optical Applications
  • PBXs
  • Multi-Line E1 Interface Cards
  • Transmit
  • DSLAMs
  • DVD-R
  • PDAs

Related Part Number

MAX4052CPE
Rochester Electronics, LLC
MAX4052CPE
$0 $/piece
TC7SB66CFU,LF(CT
Toshiba Semiconductor and Storage
TC7SB66CFU,LF(CT
$0 $/piece
FSA1156P6X
ON Semiconductor
FSA1156P6X
$0 $/piece
MAX4802ACQI+
Maxim Integrated
MAX4802ACQI+
$0 $/piece
MAX314LCPE+
Maxim Integrated
MAX314LCPE+
$0 $/piece
MAX4996ETG+T
Maxim Integrated
MAX4996ETG+T
$0 $/piece
SN74LV4066ADGVR
Texas Instruments
SN74LV4066ADGVR
$0 $/piece
ADG1334BRSZ
Analog Devices Inc.
ADG1334BRSZ
$0 $/piece
MAX4514EPA
Rochester Electronics, LLC
MAX4514EPA
$0 $/piece
MAX395EWG+T
Maxim Integrated
MAX395EWG+T
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News