MAX314LCPE+ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. In Through Hole, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around 0°C~70°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component like this is included in the 16 series. A SPST - NO/NC switching circuit is used for these analog switches. This multiplexer is composed of 4 circuits. Look for analog switch ic variants by searching with MAX314. It has an internal resistance of 10Ohm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 30V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 200μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. In the case of dual power supplies, you should connect at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating voltages of 18V are compatible with the electrical part.

MAX314LCPE+ Features

1 Channels
Switch Circuit: SPST - NO/NC

MAX314LCPE+ Applications

There are a lot of Maxim Integrated MAX314LCPE+ Analog Switches & Multiplexers ICs applications.

• Wireless Local Loop
• Modems
• Video signal routing
• PCMCIA cards
• Medical Instrumentation
• ATM
• FTTH
• Ultrasound
• Remote Powered Equipment
• 65 V DACs