ADG1212YCPZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-WFQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. An electrical component like this is included in the 16 series. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with ADG1212 to find analog multiplexer variants. Analog switches have 190Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 380μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. With dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The electronic component can function from 12V. 700MHz bandwidths enable data to be transferred.

ADG1212YCPZ-REEL7 Features

4 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 1GHz
Bandwidth: 700MHz

ADG1212YCPZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1212YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Cell phones
• Signal routing between systems
• Central office
• Data switching
• Isolation
• Channel Banks
• High speed data transmission line cards
• Audio signal routing
• T1/E1 Terminals
• Routers