74HCT2G66DP-Q100H Overview

Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~125°C TA. There are 8 pins injected into the electronic part body. Multiplexers built on a SPST - NO switching circuit are built. There are 2 circuits in this multiplexer. Search with 74HCT2G66 if you are looking for analog multiplexer variants. Analog switches have 95Ohm internal resistance. For details about the functions of 8 pins, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 4.5V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 40μA current. Using a single voltage supply, this switch device consumes 4.5V~5.5V volts. It may damage the digital multiplexer if the voltage is higher than 20μA. There is a voltage range of 5V operating voltages for the electrical part. This is electronic component of the Automotive, AEC-Q100 series.

74HCT2G66DP-Q100H Features

Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz

74HCT2G66DP-Q100H Applications

There are a lot of Nexperia USA Inc. 74HCT2G66DP-Q100H Analog Switches & Multiplexers ICs applications.

• Cellular phones
• Ultrasound
• Communications systems
• USB 1.1 signal switching circuits
• Private Branch Exchange (PBX)
• PBXs
• Communication systems
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• PBX interfaces
• Battery-powered systems