Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1313YRUZ

  • ADG1313YRUZ
  • ADG1313YRUZ

ADG1313YRUZ

ADG1313YRUZ

Analog Devices Inc.

125ns, 50ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1313 16 Pins 10nA 15V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG1313YRUZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 10 Weeks
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~105°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Termination SMD/SMT
ECCN Code EAR99
Resistance 200Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 4.8mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 0.65mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number ADG1313
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 12V
Number of Channels 4
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Nominal Supply Current 320μA
Power Dissipation 4.8mW
Max Supply Current 380μA
Throw Configuration SP8T
Turn On Delay Time 125 ns
Voltage - Supply, Single/Dual (±) 12V ±15V
Supply Type Dual, Single
Bandwidth 600MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 50 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 200Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 80 dB
Current - Leakage (IS(off)) (Max) 10nA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 125ns, 50ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 180ns
Switch-off Time-Max 60ns
Drain to Source Resistance 130Ohm
Height 1.05mm
Length 5.1mm
Width 4.5mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $3.10000 $3.1
96 $2.63615 $253.0704
192 $2.28464 $438.65088
576 $1.94486 $1120.23936
1,056 $1.64024 $1.64024
2,592 $1.55823 $3.11646
ADG1313YRUZ Product Details

ADG1313YRUZ Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~105°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Search with ADG1313 if you are looking for analog multiplexer variants. This digital multiplexer has 200Ohm internal resistance. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. Put voltage above 380μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. For dual power supplies, a voltage of at least 5V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A voltage of 12V can be used to operate the electronic component. A 600MHz-bandwidth can be used for data transfer. There is 130Ohm resistance between Drain and Source for this electronic part.

ADG1313YRUZ Features


4 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 600MHz
Drain-to-Source resistance: 130Ohm

ADG1313YRUZ Applications


There are a lot of Analog Devices Inc. ADG1313YRUZ Analog Switches & Multiplexers ICs applications.

  • Power routing
  • Access Concentrators
  • Battery Powered Systems
  • Digital access cross connects
  • Communication systems
  • Transmit
  • MP3 players
  • Mechanical reed relay replacement
  • Avionics test equipment
  • Channel Banks

Related Part Number

MAX4661CWE+
Maxim Integrated
MAX4661CWE+
$0 $/piece
NLAS4684MNR2G
ON Semiconductor
NLAS4684MNR2G
$0 $/piece
D24067IM96G4Q1
Texas Instruments
D24067IM96G4Q1
$0 $/piece
MAX4052ESE+T
Maxim Integrated
MAX4052ESE+T
$0 $/piece
DG441DY-T1-E3
Vishay Siliconix
DG441DY-T1-E3
$0 $/piece
MAX336EAI+T
Maxim Integrated
MAX336EAI+T
$0 $/piece
MAX338MSE/PR3+
Maxim Integrated
MAX338MSE/PR3+
$0 $/piece
DG405DJ-E3
Vishay Siliconix
DG405DJ-E3
$0 $/piece
MAX4618CPE+
Maxim Integrated
MAX4618CPE+
$0 $/piece
NLVHC4851ADTR2G
ON Semiconductor
NLVHC4851ADTR2G
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News