ADG1408YCPZ-REEL7 Overview

Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Temperatures around -40°C~125°C TA are extended for operation. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 16 pins. Circuits number 1 make up this analogue multiplexer. Search with ADG1408 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 4.7Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. It is recommended to use 5V as the lowest voltage for the electrical part. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. If you are using dual power supplies, you should attach at least 4.5V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. 12V operating voltages are supported by the electronic component. The transfer of data can be performed over 60MHz bandwidths. It conducts in a 8-bit manner.

ADG1408YCPZ-REEL7 Features

8 Channels
Bandwidth: 60MHz
8-Bit

ADG1408YCPZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1408YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Precision instrumentation
• Remote Powered Equipment
• Avionics and Military Systems
• Audio signal routing
• Data Acquisition Systems
• Relay replacements
• Power routing
• Optical Applications
• Digital access cross connects
• Existing multiplexer applications (both fault-protected and nonfault-protected)