Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1413YRUZ

  • ADG1413YRUZ
  • ADG1413YRUZ

ADG1413YRUZ

ADG1413YRUZ

Analog Devices Inc.

150ns, 120ns SPST - NO/NC 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1413 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG1413YRUZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 1.8Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 4.97mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
[email protected] Reflow Temperature-Max (s) 30
Base Part Number ADG1413
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 12V
Number of Channels 1
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Power Dissipation 4.97mW
Max Supply Current 380μA
Turn On Delay Time 150 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 5V~16.5V ±4.5V~16.5V
Supply Type Dual, Single
Bandwidth 170MHz
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 120 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 1.8Ohm
Min Dual Supply Voltage 4.5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 80 dB
Current - Leakage (IS(off)) (Max) 550pA
Channel Capacitance (CS(off), CD(off)) 23pF 23pF
On-state Resistance Match-Nom 0.13Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 150ns, 120ns
Insertion Loss (dB) -0.35 dB
Charge Injection -20pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -100dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 510ns
Switch-off Time-Max 380ns
Drain to Source Resistance 1.8Ohm
Height 1.05mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $39.942720 $39.94272
10 $37.681811 $376.81811
100 $35.548879 $3554.8879
500 $33.536678 $16768.339
1000 $31.638375 $31638.375
ADG1413YRUZ Product Details

ADG1413YRUZ Overview


The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. A total of 16 pins are injected into the electrical part body. These analog multiplexers are built based on SPST - NO/NC switching circuits. ADG1413 can be used to search for analog multiplexer variants. An switch multiplexer with 1.8Ohm internal resistance has a value of 1.8Ohm. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 5V. The analogue multiplexer may be damaged if voltage is greater than 380μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 12V operating voltages are supported by the electronic component. In order to operate the 4 inputs, there are several steps to follow. 170MHz bandwidths enable data to be transferred. Resistivity from Drain to Source is 1.8Ohm for this electronic part.

ADG1413YRUZ Features


1 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 170MHz
Drain-to-Source resistance: 1.8Ohm

ADG1413YRUZ Applications


There are a lot of Analog Devices Inc. ADG1413YRUZ Analog Switches & Multiplexers ICs applications.

  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • HDTV
  • Industrial
  • Avionics and Military Systems
  • Precision data acquisition
  • Remote wireless modules
  • Access Concentrators
  • High speed data transmission line cards
  • Industrial and process control systems
  • Multi-Line E1 Interface Cards

Related Part Number

PI3A268CZMEX
Diodes Incorporated
PI3A268CZMEX
$0 $/piece
ADG812YRU
Analog Devices Inc.
ADG812YRU
$0 $/piece
MAX4666CSE+
Maxim Integrated
MAX4666CSE+
$0 $/piece
MAX369CPN+
Maxim Integrated
MAX369CPN+
$0 $/piece
ISL84467IVZ
Renesas Electronics America Inc.
ISL84467IVZ
$0 $/piece
ADG719BRTZ-REEL
Analog Devices Inc.
ADG719BRTZ-REEL
$0 $/piece
MAX4656EUA+
Maxim Integrated
MAX4656EUA+
$0 $/piece
ADG528AKNZ
Analog Devices Inc.
ADG528AKNZ
$0 $/piece
MAX4581CUE+
Maxim Integrated
MAX4581CUE+
$0 $/piece
ADG722BRM-REEL7
Rochester Electronics, LLC
ADG722BRM-REEL7
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News