ADG1433YRUZ Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 3 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching with ADG1433 if you're looking for variants. There is 4.7Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 475μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. 12V operating voltages are supported by the electronic component. It is possible to operate 3 inputs. A 200MHz-bandwidth can be used for data transfer. Drain to Source resistance is 4.7Ohm. The analogue multiplexer has 6 outputs.

ADG1433YRUZ Features

3 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
Drain-to-Source resistance: 4.7Ohm

ADG1433YRUZ Applications

There are a lot of Analog Devices Inc.
ADG1433YRUZ Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems