As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. The operating temperature is extended to around -40°C~125°C TA. The electronic part provides high-quality output because it has 3 channels. Unlike digital switches, these are based on SPDT switching circuits. There are 3 circuits in this multiplexer. ADG1433 can be used to search for analog multiplexer variants. There is 4.7Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. normally, users should not supply switches with voltages higher than 16.5V. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 5V should be applied to the electronic component. The analogue multiplexer could operate on 260μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 475μA. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. For dual power supplies, a voltage of at least 4.5V should be attached. 12V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 3 inputs. 200MHz bandwidths enable data to be transferred. An environment with a temperature greater than 125°C should not be used to operate the digital switches. There are 6 outputs on the analogue multiplexer. There is a 16-TSSOP package offered by suppliers.