74HCT4052D-Q100,11 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. The analog switch ics are built using SP4T switching circuits. A total of 2 circuits make up this switch device. Search with 74HCT4052 if you are looking for analog multiplexer variants. It has an internal resistance of 210Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 320μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. There are COMMON OUTPUT outputs on this analog switch ic. There is a voltage range of 5V operating voltages for the electrical part. The transfer of data can be performed over 180MHz bandwidths. It belongs to the series Automotive, AEC-Q100.

74HCT4052D-Q100,11 Features

8 Channels
Switch Circuit: SP4T
320μA Supply Current
Bandwidth: 180MHz

74HCT4052D-Q100,11 Applications

There are a lot of Nexperia USA Inc.
74HCT4052D-Q100,11 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems