ADG1606BRUZ-REEL7 Overview

As the electronic part is packed in 28-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 16:1. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 28 terminations. Due to its 16 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 28 pins. It consists of 1 circuits. Try searching with ADG1606 to find analog multiplexer variants. Analog switches have 5Ohm internal resistance. Datasheets for functions of 28 pins are available. Multiplexers should not be powered above 16V in normal situations. An effective Dual, Single supply digital multiplexer. It is recommended to use 3.3V as the lowest voltage for the electrical part. The switch device would be able to operate with 300μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. For dual power supplies, a voltage of at least 3.3V should be attached. In this switch multiplexer, there are COMMON OUTPUT outputs available. It can operate from 5V operating voltages. In 22MHz-bandwidths, data can be transferred.

ADG1606BRUZ-REEL7 Features

16 Channels
300μA Supply Current
Bandwidth: 22MHz

ADG1606BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1606BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Data Acquisition Systems
• Fiber In The Loop (FITL)
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Automotive applications
• Battery Powered Systems
• SDH/SONET multiplexers
• Precision test equipment
• Central office
• Audio and video switching
• Industrial