ADG1607BRUZ-REEL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 28-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operational temperature extended around -40°C~125°C TA. 28 terminations have been made so far. By its 8 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. A total of 28 pins are injected into the body of the electronic part. The circuits in this analogue multiplexer number 2. Use ADG1607 to search for variants of the digital switches. Analog switches have 5Ohm internal resistance. For details about the functions of 28 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 16V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 3.3V is the lowest voltage the electrical component should receive. This multiplexer would work with 370μA current. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 3.3V voltage attached. A total of COMMON OUTPUT outputs are available on this analog switch ic. A voltage of 5V can be used to operate the electronic component. Among the inputs that can be operated are the 16 inputs. This switch operates within the bandwidth of 38MHz.

ADG1607BRUZ-REEL7 Features

8 Channels
370μA Supply Current
Bandwidth: 38MHz

ADG1607BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1607BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Routers
• Medical
• Industrial control systems
• Sample hold systems
• SDH/SONET multiplexers
• Private Branch Exchange (PBX)
• Isolation
• Automotive applications
• Modems
• Communication systems