ADG1612BRUZ-REEL Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. Totally, there are 16 terminations. An electrical component of this type can be found in the 16 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with ADG1612 to find analog multiplexer variants. In this multiplexer, the internal resistance is 1.1Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 16V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. In order for the electronic part to function properly, the lowest voltage should be 3.3V. This digital switch can be operated with a current of 320μA. Putting voltage greater than 480μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. For dual power supplies, a voltage of at least 3.3V should be attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Among the inputs that can be operated are the 4 inputs. 38MHz bandwidths enable data to be transferred.

ADG1612BRUZ-REEL Features

Switch Circuit: SPST - NO
320μA Supply Current
Bandwidth: 38MHz

ADG1612BRUZ-REEL Applications

There are a lot of Analog Devices Inc. ADG1612BRUZ-REEL Analog Switches & Multiplexers ICs applications.

• Wireless Local Loop
• Intelligent PBX
• Avionics
• Cross Connects
• DSLAMs
• Transmit
• ATM
• High-Voltage
• Remote wireless modules
• High reliability control systems