The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching with ADG1636 to find analog multiplexer variants. A 1.1Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 16V to a switch device. Dual, Single supply type digital switch with a low cost. 3.3V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 360μA on the multiplexer to cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. A dual power supply should have at least 3.3V voltage attached. It is integrated with a SPST analog IC. It is possible to operate 2 inputs. The data can be transferred over a wide range of bandwidths, called 27MHz bandwidths. A analog switch ics with 4 outputs is included.
ADG1636BRUZ Features
1 Channels Switch Circuit: SPDT Bandwidth: 27MHz
ADG1636BRUZ Applications
There are a lot of Analog Devices Inc. ADG1636BRUZ Analog Switches & Multiplexers ICs applications.