ADG407BP Overview

As the electronic part is packed in 28-LCC (J-Lead), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 28. The electronic part provides high-quality output because it has 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 28 pins. There are 2 circuits in this switch device. Try searching with ADG407 to find analog multiplexer variants. An switch multiplexer with 80Ohm internal resistance has a value of 80Ohm. Datasheets for 28 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 25V in normal situations. An operating current of 100μA would be sufficient for this switch device. When the digital multiplexer is charged above 200μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 22V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. 12V operating voltages can be used with this electrical part. Operating the 16 inputs requires 16 inputs. Providing the analog switch ic with electricity requires a minimum voltage of 13.5V.

ADG407BP Features

8 Channels
100μA Supply Current

ADG407BP Applications

There are a lot of Analog Devices Inc.
ADG407BP Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement