ADG419BRZ-REEL7 Overview

Packed in 8-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Around -40°C~125°C TA is the extended operating temperature. In total, there are 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component like this is included in the 8 series. A SPDT switching circuit is used to build these analog multiplexers. Try searching for ADG419 variants of the analog switch ic. In this multiplexer, the internal resistance is 35Ohm. The datasheets for the 8 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. An effective Dual, Single supply digital multiplexer. 5V should be the lowest voltage fed to the electronic component. This multiplexer would work with 100pA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. If you are using dual power supplies, you should attach at least 13.5V. Operating voltages range from 12V. A analog switch ics with 2 outputs is included.

ADG419BRZ-REEL7 Features

1 Channels
Switch Circuit: SPDT
100pA Supply Current

ADG419BRZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG419BRZ-REEL7 Analog Switches & Multiplexers ICs applications.

• RGB switches
• Intelligent PBX
• Communication systems
• DVD-R
• Avionics
• DSLAMs
• Switching Systems
• Fiber to the Home
• Wireless Local Loop
• Microwave transmission systems