Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG507BEN-T1-GE3

DG507BEN-T1-GE3

DG507BEN-T1-GE3

Vishay Siliconix

250ns, 200ns 300Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG507 28 Pins 1nA 15V 28-LCC (J-Lead)

SOT-23

DG507BEN-T1-GE3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 12 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2011
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
Resistance 450Ohm
Max Power Dissipation 1.693W
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
[email protected] Reflow Temperature-Max (s) 40
Base Part Number DG507
Pin Count 28
Operating Supply Voltage 15V
Number of Channels 8
Number of Circuits 2
Max Supply Voltage 44V
Min Supply Voltage 12V
Operating Supply Current 100μA
Nominal Supply Current 5μA
Max Supply Current 100μA
Turn On Delay Time 420 ns
Logic Function Multiplexer
Supply Type Dual, Single
Bandwidth 217MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 220 ns
Max Dual Supply Voltage 20V
On-State Resistance (Max) 300Ohm
Min Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 84 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 3pF 17pF
On-state Resistance Match-Nom 10Ohm
Switch Time (Ton, Toff) (Max) 250ns, 200ns
Charge Injection 1pC
Channel-to-Channel Matching (ΔRon) 10 Ω
Crosstalk -84dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 310ns
Signal Current-Max 0.03A
Voltage - Supply, Dual (V±) ±5V~20V
Height Seated (Max) 4.57mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $4.652000 $4.652
10 $4.388679 $43.88679
100 $4.140263 $414.0263
500 $3.905909 $1952.9545
1000 $3.684820 $3684.82
DG507BEN-T1-GE3 Product Details

DG507BEN-T1-GE3 Overview


Due to its 28-LCC (J-Lead) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -40°C~125°C TA. The total number of terminations is 28. The electronic part provides high-quality output because it has 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. An electrical component of this type can be found in the 28 series. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with DG507 if you are looking for variants. As far as internal resistance is concerned, it has 450Ohm. The functions of 28 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 44V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 12V. In order to operate this switch device, it would need a current of 100μA. If you put voltage higher than 100μA on the digital multiplexer, damage may occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using dual power supplies, you should attach at least 5V. It can operate from 15V operating voltages. It is possible to transfer data over a 217MHz-bandwidth.

DG507BEN-T1-GE3 Features


8 Channels
100μA Supply Current
Bandwidth: 217MHz

DG507BEN-T1-GE3 Applications


There are a lot of Vishay Siliconix DG507BEN-T1-GE3 Analog Switches & Multiplexers ICs applications.

  • Ultrasound
  • Precision test equipment
  • Medical Instrumentation
  • Imaging
  • E1 Network Equipment
  • Audio and video signal routing
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • PBXs
  • New designs requiring multiplexer functions
  • Central office

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News