Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG432BRZ

  • ADG432BRZ
  • ADG432BRZ

ADG432BRZ

ADG432BRZ

Analog Devices Inc.

90ns, 60ns SPST - NO 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG432 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

SOT-23

ADG432BRZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 24Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 7.7μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG432
Pin Count 16
Operating Supply Voltage 12V
Polarity Non-Inverting
Number of Channels 4
Interface Parallel
Max Supply Voltage 25V
Min Supply Voltage 5V
Operating Supply Current 100pA
Power Dissipation 3.5μW
Max Supply Current 100nA
Throw Configuration SPST
Turn On Delay Time 165 ns
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 130 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 24Ohm
Min Dual Supply Voltage 13.5V
High Level Output Current 30mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 9pF 9pF
On-state Resistance Match-Nom 0.85Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 90ns, 60ns
Charge Injection 5pC
Channel-to-Channel Matching (ΔRon) 1.2 Ω
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 17Ohm
Normal Position NO
Voltage - Supply, Dual (V±) ±15V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $29.443289 $29.443289
10 $27.776688 $277.76688
100 $26.204423 $2620.4423
500 $24.721154 $12360.577
1000 $23.321843 $23321.843
ADG432BRZ Product Details

ADG432BRZ Overview


The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. Due to its 4 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPST - NO switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with ADG432. There is 24Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 25V. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 5V as the lowest voltage for the electrical part. An operating current of 100pA would be sufficient for this switch device. If you put voltage higher than 100nA on the digital multiplexer, damage may occur. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIt is recommended that you attach at least 13.5V to your dual power supply. It can operate from 12V operating voltages. There is 17Ohm Drain to Source resistance on this electronic part.

ADG432BRZ Features


4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Drain-to-Source resistance: 17Ohm

ADG432BRZ Applications


There are a lot of Analog Devices Inc. ADG432BRZ Analog Switches & Multiplexers ICs applications.

  • High speed data transmission line cards
  • Microprocessor Controlled Analog Systems
  • 65 V DACs
  • Remote wireless modules
  • Precision instrumentation
  • Fault Tolerant Systems
  • Access Concentrators
  • PDH Multiplexers
  • Sample-and-hold systems
  • Digital access cross connects

Related Part Number

ADG722BRMZ-REEL
Analog Devices Inc.
ADG722BRMZ-REEL
$0 $/piece
MAX312LEUE+
Maxim Integrated
MAX312LEUE+
$0 $/piece
DG409DJ+
Maxim Integrated
DG409DJ+
$0 $/piece
ADG723BRMZ
Analog Devices Inc.
ADG723BRMZ
$0 $/piece
LTC1393CS#PBF
Linear Technology/Analog Devices
LTC1393CS#PBF
$0 $/piece
ADG612YRUZ
Analog Devices Inc.
ADG612YRUZ
$0 $/piece
DG2523DN-T1-GE4
Vishay Siliconix
DG2523DN-T1-GE4
$0 $/piece
MUX24EPZ
Rochester Electronics, LLC
MUX24EPZ
$0 $/piece
DG407DJZ
Renesas Electronics America Inc.
DG407DJZ
$0 $/piece
DG406EWI+
Maxim Integrated
DG406EWI+
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News