ADG436BR-REEL Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. A 2 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. There are 16 pins injected into the electronic part body. A SPDT switching circuit is used for these analog switches. Try searching with ADG436 to find analog multiplexer variants. An switch multiplexer with 12Ohm internal resistance has a value of 12Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 30V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. There should be 3V voltage fed to the electrical part below 3V. The analogue multiplexer may be damaged if voltage is greater than 350μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 3V. There is a voltage range of 12V operating voltages for the electrical part. Multiplexer ics with 4 outputs are available.

ADG436BR-REEL Features

2 Channels
Switch Circuit: SPDT

ADG436BR-REEL Applications

There are a lot of Analog Devices Inc. ADG436BR-REEL Analog Switches & Multiplexers ICs applications.

• HDTV
• Relay Replacement
• PBX interfaces
• Fiber In The Loop (FITL)
• Ultrasound
• Data Acquisition Systems
• Avionics test equipment
• RGB switches
• Channelized and Unchannelized DS3 applications
• Communications systems