Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG453BRUZ-REEL7

  • ADG453BRUZ-REEL7
  • ADG453BRUZ-REEL7

ADG453BRUZ-REEL7

ADG453BRUZ-REEL7

Analog Devices Inc.

180ns, 140ns SPST - NO/NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG453 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG453BRUZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 10 Weeks
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 5Ohm
Additional Feature ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 17.5μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number ADG453
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 9V
Polarity Non-Inverting
Number of Channels 4
Interface Parallel
Max Supply Voltage 12V
Min Supply Voltage 5V
Operating Supply Current 100pA
Power Dissipation 17.5μW
Max Supply Current 500nA
Throw Configuration SPST
Turn On Delay Time 180 ns
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 140 ns
Max Dual Supply Voltage 15V
On-State Resistance (Max) 5Ohm
Min Dual Supply Voltage 5V
High Level Output Current 100mA
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 65 dB
Neg Supply Voltage-Max (Vsup) -20V
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 37pF 37pF
On-state Resistance Match-Nom 0.3Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 180ns, 140ns
Charge Injection 20pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 220ns
Voltage - Supply, Dual (V±) ±4.5V~20V
Height Seated (Max) 1.2mm
Length 5mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $12.934792 $12.934792
10 $12.202634 $122.02634
100 $11.511919 $1151.1919
500 $10.860301 $5430.1505
1000 $10.245567 $10245.567
ADG453BRUZ-REEL7 Product Details

ADG453BRUZ-REEL7 Overview


Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. 16 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Try searching with ADG453 to find analog multiplexer variants. A 5Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 5V. For this multiplexer to operate, 100pA current would be sufficient. It may damage the digital multiplexer if the voltage is higher than 500nA. For this switch, a dual supply voltage is feasible, but it must not exceed 15VIn the case of dual power supplies, you should connect at least 5V. A voltage of 9V can be used to operate the electronic component. There is also ALSO OPERATE WITH 12V SINGLE SUPPLY to look out for in this electronic part.

ADG453BRUZ-REEL7 Features


4 Channels
Switch Circuit: SPST - NO/NC
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG453BRUZ-REEL7 Applications


There are a lot of Analog Devices Inc. ADG453BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • 65 V DACs
  • Switching Systems
  • Audio/video switches
  • Communications systems
  • Channelized and Unchannelized DS3 applications
  • Battery-powered systems
  • Power routing
  • SDH
  • Ultrasound
  • Audio and video routing

Related Part Number

MAX4669CPE
Maxim Integrated
MAX4669CPE
$0 $/piece
ADG411BRUZ
Analog Devices Inc.
ADG411BRUZ
$0 $/piece
STG4160BJR
STMicroelectronics
STG4160BJR
$0 $/piece
MAX4520EUA
Maxim Integrated
MAX4520EUA
$0 $/piece
MAX4660ESA+
Maxim Integrated
MAX4660ESA+
$0 $/piece
ALD4201PCL
Advanced Linear Devices Inc.
ALD4201PCL
$0 $/piece
ISL43240IAZ-T
Renesas Electronics America Inc.
ISL43240IAZ-T
$0 $/piece
DG442DYZ-T
Renesas Electronics America Inc.
DG442DYZ-T
$0 $/piece
DG2733EDN-T1-GE4
Vishay Siliconix
DG2733EDN-T1-GE4
$0 $/piece
CD4067BPW
Texas Instruments
CD4067BPW
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News