ADG509FBRUZ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Try searching with ADG509 to find analog multiplexer variants. It has an internal resistance of 270Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. The lowest voltage the electronic part should receive is 10.8V. When the digital multiplexer is charged above 1μA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 22V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A voltage of 15V can be used to operate the electronic component. There are 8 inputs to be operated. Drain to Source resistance for this electronic component is 390Ohm.

ADG509FBRUZ Features

4 Channels
Switch Circuit: SP4T
Drain-to-Source resistance: 390Ohm

ADG509FBRUZ Applications

There are a lot of Analog Devices Inc. ADG509FBRUZ Analog Switches & Multiplexers ICs applications.

• DSUs
• DVD-R
• SDH/SONET multiplexers
• Cable Modem
• Avionics test equipment
• Microprocessor controlled systems
• Wireless Local Loop
• Microprocessor Controlled Analog Systems
• Communication systems
• Automatic test equipment