ADG608BRUZ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. This analog switch is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. By its 8 channels, the electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 16 pins. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with ADG608. It has an internal resistance of 30Ohm. The functions of 16 pins can be found in the datasheets. Users shouldn't supply more than 6.5V voltage to the switch device. A low voltage of 3V should be applied to the electronic component. This multiplexer would work with 50nA current. Despite this switch device's dual supply capability, its voltage should not exceed 6.5V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. The electrical part can be operated at 5.5V voltage levels. The electrical component supports 8 inputs. There is also OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE to look out for in this electronic part. Resistivity from Drain to Source is 30Ohm for this electronic part.

ADG608BRUZ Features

8 Channels
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
Drain-to-Source resistance: 30Ohm

ADG608BRUZ Applications

There are a lot of Analog Devices Inc. ADG608BRUZ Analog Switches & Multiplexers ICs applications.

• Low-Voltage
• Frame Relay Equipment
• Channel Banks
• Data Acquisition Systems
• DSUs
• Audio signal routing
• ATM
• T1/E1 Terminals
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Switching Systems