ADG406BPZ Overview

Presented in 28-LCC (J-Lead), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 28 terminations. This electronic part offers high-quality output due to its 16 channels. A 15V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 28 pins. A total of 1 circuits make up this switch device. ADG406 can be used to search for analog multiplexer variants. Analog switches have 80Ohm internal resistance. The datasheets for the 28 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. This digital switch can be operated with a current of 100μA. It may damage the digital multiplexer if the voltage is higher than 200μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Operating voltages of 12V are compatible with the electrical part. The Drain to Source resistance of this electronic component is 50Ohm.

ADG406BPZ Features

16 Channels
100μA Supply Current
Drain-to-Source resistance: 50Ohm

ADG406BPZ Applications

There are a lot of Analog Devices Inc. ADG406BPZ Analog Switches & Multiplexers ICs applications.

• Microwave transmission systems
• Data Acquisition Systems
• E1 Multiplexer
• Digital access cross connects
• High-Voltage
• ISDN NT1/TA
• High speed data transmission line cards
• PDH Multiplexers
• Avionics and Military Systems
• Switching Systems