MPC509AP Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 4:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Try searching with MPC509 if you're looking for variants. There is 1.5kOhm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Analogue multiplexers of the Dual supply type that are cost-effective. For this multiplexer to operate, 700μA current would be sufficient. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 5V. 18V operating voltages are supported by the electronic component. It is possible to operate 8 inputs. Drain to Source resistance is 1.3kOhm. The analogue multiplexer has 1 outputs.

MPC509AP Features

2 Channels
Switch Circuit: SP4T
700μA Supply Current
Drain-to-Source resistance: 1.3kOhm

MPC509AP Applications

There are a lot of Texas Instruments
MPC509AP Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems