Packed in SOT-23-8, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. A 5V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 8 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Search with ADG619 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 6.5Ohm. To find out what the 8 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. The analogue multiplexer could operate on 1nA current. A voltage higher than 1μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 5.5VA dual power supply should have at least 2.7V voltage attached. In 190MHz-bandwidths, data can be transferred. The analogue multiplexer has 2 outputs.
ADG619BRTZ-500RL7 Features
1 Channels Switch Circuit: SPDT 1nA Supply Current Bandwidth: 190MHz
ADG619BRTZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG619BRTZ-500RL7 Analog Switches & Multiplexers ICs applications.
Precision instrumentation
Automotive applications
Video switching
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads