CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
Subcategory
Multiplexer or Switches
Max Power Dissipation
5μW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.65mm
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
ADG707
Pin Count
28
Operating Supply Voltage
5V
Power Supplies
3/5/+-3V
Number of Channels
8
Interface
Parallel
Number of Circuits
2
Max Supply Voltage
5.5V
Min Supply Voltage
1.8V
Analog IC - Other Type
DIFFERENTIAL MULTIPLEXER
Operating Supply Current
1μA
Nominal Supply Current
1μA
Power Dissipation
5μW
Number of Inputs
16
Voltage - Supply, Single/Dual (±)
1.8V~5.5V ±2.5V
Bandwidth
36MHz
Supply Current-Max (Isup)
0.001mA
Neg Supply Voltage-Nom (Vsup)
-2.5V
Turn-Off Delay Time
10 ns
On-State Resistance (Max)
4.5Ohm
High Level Output Current
30mA
Dual Supply Voltage
2.5V
Multiplexer/Demultiplexer Circuit
8:1
Off-state Isolation-Nom
80 dB
Current - Leakage (IS(off)) (Max)
100pA
Channel Capacitance (CS(off), CD(off))
13pF 90pF
On-state Resistance Match-Nom
0.3Ohm
Switch Time (Ton, Toff) (Max)
32ns, 16ns (Typ)
Charge Injection
8pC
Crosstalk
-80dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
50ns
Drain to Source Resistance
300mOhm
Signal Current-Max
0.03A
Height
1.05mm
Length
9.7mm
Width
4.4mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$6.78000
$6.78
50
$5.83880
$291.94
100
$5.06980
$506.98
500
$4.41472
$2207.36
1,000
$3.84507
$3.84507
ADG707BRUZ Product Details
ADG707BRUZ Overview
Due to its 28-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 8:1. Operation at a temperature around -40°C~85°C TA. A total of 28 terminations have been recorded. The electronic part delivers high-quality output through its 8 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. Electronic part bodies are injected with 28 pins. A 2 circuit is present in this switch device. ADG707 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 2.5Ohm. You can find the functions of the 28 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. In order for the electronic part to function properly, the lowest voltage should be 1.8V. The switch device would be able to operate with 1μA current. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. It can operate from 5V operating voltages. Operating 16 inputs is required. 36MHz bandwidths enable data to be transferred. Additional features include: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES. Drain to Source resistance for this electronic component is 300mOhm.
ADG707BRUZ Features
8 Channels 1μA Supply Current Bandwidth: 36MHz Additional Features: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES Drain-to-Source resistance: 300mOhm
ADG707BRUZ Applications
There are a lot of Analog Devices Inc. ADG707BRUZ Analog Switches & Multiplexers ICs applications.