ADG708BRU Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Search with ADG708 if you are looking for analog multiplexer variants. It has an internal resistance of 4.5Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. 1.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1nA. A digital multiplexer may suffer damage if voltage is applied above 1μA. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. There is a voltage range of 5V operating voltages for the electrical part. There are 8 inputs to be operated. The transfer of data can be performed over 55MHz bandwidths. The Drain to Source resistance of this electronic component is 3Ohm.

ADG708BRU Features

8 Channels
1nA Supply Current
Bandwidth: 55MHz
Drain-to-Source resistance: 3Ohm

ADG708BRU Applications

There are a lot of Analog Devices Inc.
ADG708BRU Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems