Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 16 pins are injected into the electrical part body. A SPST - NO/NC switching circuit is used for these analog switches. Using the ADG713 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 4Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. 1.8V is the lowest voltage the electrical component should receive. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. Putting voltage greater than 1μA on the multiplexer may cause damage. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. This electrical component also includes additional features such as CAN ALSO OPERATE WITH 5 V SUPPLY.
ADG713BRUZ-REEL7 Features
4 Channels Switch Circuit: SPST - NO/NC Bandwidth: 200MHz Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
ADG713BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG713BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)