ADG784BCPZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-WFQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tray. In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Totally, there are 20 terminations. A electrical component with 2 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Into the electrical component body are injected 20 pins. A SPDT switching circuit is used for these analog switches. There are 4 circuits in this multiplexer. Try searching with ADG784 to find analog multiplexer variants. An switch multiplexer with 2.2Ohm internal resistance has a value of 2.2Ohm. The functions of 20 pins can be found in the datasheets. Users should never supply a voltage higher than 5V to a switch device. 3.3V is the lowest voltage that should be fed to the electronic electronic part. Analogue multiplexers require a 3.3V 5V voltage to drain from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating 8 inputs is required. There are various bandwidths available for data transfer. This electronic part has additional features, such as: ALSO OPERATES AT 5V SUPPLY.

ADG784BCPZ Features

2 Channels
Switch Circuit: SPDT
Bandwidth: 240MHz
Additional Features: ALSO OPERATES AT 5V SUPPLY

ADG784BCPZ Applications

There are a lot of Analog Devices Inc. ADG784BCPZ Analog Switches & Multiplexers ICs applications.

• Precision instrumentation
• New designs requiring multiplexer functions
• PBXs
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Medical systems
• High speed data transmission line cards
• SDH
• Data Acquisition Systems
• Imaging
• Remote wireless modules