Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 8 pins. A SPDT switching circuit is used for these analog switches. Search with ADG819 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 600mOhm. To find out what the functions of 8 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.8V. It would be sufficient to run this analogue multiplexer with 1nA current. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. A voltage higher than 2μA may cause damage to the switch multiplexer. In 17MHz-bandwidths, data can be transferred. Multiplexer ics with 2 outputs are available.
ADG819BRMZ-REEL7 Features
1 Channels Switch Circuit: SPDT 1nA Supply Current Bandwidth: 17MHz
ADG819BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG819BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
PBXs
Video switching
Voice over IP/DSL – Integrated Access Devices, Smart