ADP5062ACPZ-2-R7 Overview

There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 20-WFQFN Exposed Pad, CSP package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to -40°C~125°C TJ in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number ADP5062 can be found by following the order of the base part number.It contains a total of 20 terminations.As far as the battery pack is concerned, it is 4.3V.It is equipped with 20 pins.As long as it is charged at maximum current, it will be rated as 1.3A.It requires pins 20 to function.The number of available channels is 1.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 6.7V.In this case, the output current of the device is set to 2.1A.Amounting is in line with Surface Mount.Its supply carries 2mA current.It is important to keep the power supply voltage (Vsup) above 4V so that normal operation can take place.As a maximum output supply voltage for this operation, the voltage must be set to 4.2V.In the course of operation, the maximum output current is reduced to 2.1A.

ADP5062ACPZ-2-R7 Features

Battery pack voltage of 4.3V
1 channels
20-WFQFN Exposed Pad, CSP package

ADP5062ACPZ-2-R7 Applications

There are a lot of Analog Devices Inc.
ADP5062ACPZ-2-R7 Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift