AS1743G Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NO/NC switching circuits. A total of 2 circuits make up this switch device. It has an internal resistance of 800mOhm. The functions of 8 pins can be found in the datasheets. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Single supply type digital switch with a low cost. 1.6V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10nA. A voltage of 1.6V~3.6V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. The transfer of data can be performed over 130MHz bandwidths.

AS1743G Features

1 Channels
Switch Circuit: SPST - NO/NC
10nA Supply Current
Bandwidth: 130MHz

AS1743G Applications

There are a lot of ams
AS1743G Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems