A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 8 terminations to be found. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. In this clock generator, Clock is used as the input to the clock. For full access to the electronic component's capabilities, 1 circuits are implemented. 133.33MHz is the maximal value for normal operation. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. The supply voltage (Vsup) should be kept above 3V for normal operation. As long as you provide 3V~3.6V supply voltage, it will work. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. CY2305 is the base part number for finding related electronic parts. A 8 pin is available on the PLL. There is a maximum supply voltage of 3.3V that clock generator can handle. The frequency synthesizer features 5 signal outputs to ensure as high a frequency as possible. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max.
CY2305CSXC-1T Features
Available in the 8-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2305CSXC-1T Applications
There are a lot of Cypress Semiconductor Corp CY2305CSXC-1T Clock Generators applications.