CY2305CSXI-1 Overview

Tube-method packaging is used for clock ICs. The 8-SOIC (0.154, 3.90mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 8 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 8-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY2305. It is possible to connect to the frequency generators via 8 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. This clock generator can be classified as a kind of Clock Drivers in general. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.2 ns Max, this clock generator offers low timing skew. At a frequency of 133.33MHz, frequency generator is capable of achieving high efficiency. This frequency synthesizer operates at a maximum current of 35mA.

CY2305CSXI-1 Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2305CSXI-1 Applications

There are a lot of Cypress Semiconductor Corp
CY2305CSXI-1 Clock Generators applications.

• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange