As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. For safety reasons, this frequency generator's supply voltage should remain above 3V. Clock generator ic works with 3V~3.6V. Based on test statistics, ambient temperature should be set at 0°C~70°C. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 16 bits. You can find related electrical components to the base part number CY2308. There is an available 16 pin on the PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. Clock generator can also be included into Clock Drivers. The output frequency can be magnified as high as possible with the assistance of 8 signal outputs. At 0.2 ns Max, this analog clock generator exhibits low timing skew.
CY2308SXC-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2308SXC-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-1HT Clock Generators applications.