It is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains a total of 16 terminations within RF synthesizer. This clock generator ic should receive a voltage of 3.3V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. A total of 1 circuits are implemented to access the full performance of the electrical part. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. As long as you provide 3V~3.6V supply voltage, it will work. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. The RF synthesizer is compatible with LVCMOS logic levels. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. There are a number of 16 pins that are available on the clock generators. There is a maximum supply voltage of 3.3V that frequency generators can handle. As such, it is often referred to as a kind of Clock Drivers clock PLL. 9 signal outputs maximi9e the output frequency. Low timing skew is provided by this analog clock generator at maximum 0.25 ns. At 133.33MHz, frequency synthesizer achieves high efficiency.
CY2309ZXC-1HT Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
CY2309ZXC-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2309ZXC-1HT Clock Generators applications.