74LVC273AT20-13 Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. It is configured with Non-Invertedas an output. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~3.6V. A temperature of -40°C~125°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 230MHz Hz. A total of 1 elements are present. As a result, it consumes 10μA quiescent current. Its input capacitance is 4pF farads. A part of the electronic system is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. In order to achieve its superior flexibility, 2 circuits are used. There are 8 output lines on it. This input has 8lines. 10μAquiescent current consumed. In this case, the high level output current is set to 24mA. It is set to 24mAfor low level output current. A temperature below 125°Cshould be used for operation. If the operating temperature is higher than -40°C, the system should operate properly. Normally, it operates with a voltage of 1.65VV as its minimum supply voltage. It supports a maximum supply voltage of 3.6V volts. 230MHzis the maximum frequency that can be achieved.

74LVC273AT20-13 Features

Tape & Reel (TR) package
74LVC series
20 pins

74LVC273AT20-13 Applications

There are a lot of Diodes Incorporated 74LVC273AT20-13 Flip Flops applications.

• Buffer registers
• Balanced 24 mA output drivers
• Frequency division
• Patented noise
• Differential Individual
• Cold spare funcion
• Count Modes
• Computing
• 2 – Bit synchronous counter
• Data Synchronizers