Surface Mount 100 Pin Memory IC 1.1 Mb kb 14mm mm 235mA mA 18b b
SOT-23
70V38L15PF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
100
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
128kB
Number of Ports
2
Nominal Supply Current
235mA
Memory Type
RAM, SDR, SRAM
Access Time
15 ns
Organization
64KX18
Output Characteristics
3-STATE
Address Bus Width
16b
Density
1.1 Mb
Standby Current-Max
0.003A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
18b
Standby Voltage-Min
3V
Length
14mm
Height Seated (Max)
1.6mm
Width
14mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
70V38L15PF8 Product Details
70V38L15PF8 Overview
There is a RAM, SDR, SRAM memory type associated with this device. There is a TQFP case embedded in it. 128kB is the chip's memory size. The chip is terminated with 100 terminations. In total, this part supports 1 functions. Memory devices such as this one are designed to be powered by 3.3V and should be used as such. There are 100 pins on the package of the memory device. A memory device with 100 pins means that it contains 100 memory locations, indicating that it has 100 pins. This memory's operating supply voltage is 3.3V. Using Surface Mount mounting, this chip offers straightforward and high-efficiency mounting. It is rated for a nominal supply current of 235mA for this memory component. This memory chip has 2 ports for accessing one memory address via read or write. There are COMMON-bit addresses mapped into the memory for I/O ports on this device. This device must not operate below 0°C . Ideally, this memory ics should be operated at a temperature of no more than 70°C°C. In order for this part to work properly, there must be a minimum voltage supply of 3V volts. Its operating voltage shall not exceed 3.6V.